Ste.01(boots)

Introduction

Ste.01(boots) is the high-top version of Ste.01, a 3D-printed boot that emphasizes fashion and concept. Inspired by the Cthulhu Mythos, the design incorporates octopus suckers and other features into the upper and sole, blending indescribable horror aesthetics into everyday wear. Its unique styling also makes it a great conversation starter among friends. Ste.01(boots) can be printed using Bambu H2D/H2S. The entire boot is printed in one piece with TPU material, ensuring comfort for daily use.

Usage Scenarios

Suitable for daily commuting and walking indoors and on urban roads.

It is advisable to avoid high-intensity running and jumping.

Sizing Guide

The table below lists foot length, width, and corresponding scaling ratios for European shoe sizes. If your foot width exceeds or falls below the standard width for your size, adjust the model’s width scaling individually after uniformly scaling it to match your foot length.
For Example: If your foot length is 264 mm (EU 42), scale the model to 97.67%. If your foot width measures 97 mm (above the standard 95.4 mm), adjust the width scaling to 97 ÷ 95.4 × 97.67% = 99.3%. Generally, uniform scaling based on size accommodates most foot shapes.
 

Recommended Filament and Printing Tips

It is recommended to use Bambu Lab TPU 90A.

For printing considerations regarding TPU 90A, please refer to the wiki. Important tips include drying the filament before printing (even if it's freshly unsealed) and using a sealed dry box during the printing process.