Spiral Pumpkin with Limits Print in Place Spiral Crossover Toy TD6 Pumpkin

Super fun and beautiful spiral pumpkin, this time using a new crossover-type structure,it comes with a limit device and is Print in Place, so it will not separate.

Printing is super easy, Print in Place, no supports needed. You can play with it right after printing, it's very smooth.

This time, 3 different pumpkin styles are prepared, namely:

1. Small Pumpkin: Diameter 50mm x Height 32mm;

2. Large Pumpkin: Diameter 70mm x Height 45mm;

3. Tall Pumpkin: Diameter 50mm x Height 58mm.

You can choose the corresponding print profile for printing. It should be noted that each style provides both an overall print and a multi-part print version; please select the desired version for printing as needed.

When printing tall columnar models, please be sure to clean the build plate to avoid adhesion failures. Before printing, confirm that the filament is dry. For devices with an enclosure, please open the door appropriately. Good ventilation and heat dissipation can result in a better overhang appearance.

Thanks to all that have downloaded, liked, commented, or boosted my models you don't know how much I appreciate all of you and please feel free to continue to do so.

Welcome to my folder. I will continue to update it with more fun and interesting stress-relief toys.

Planetary Gear Spinner

Helical toy

Ratchet toy

spinning top