Texture Roller - Ivy Tangle

Texture Roller – Ivy Tangle (Seamless, Embossed)

Trailing ivy runners with layered, heart-shaped leaves create a lively all-over texture. This 3D-printed roller presses a crisp, embossed pattern that wraps end-to-end with no visible join.

Applications

• Ceramics & Pottery: Instant raised texture—no carving required.
• Polymer Clay & Craft Dough

Sizes

• ✅ Medium: 120 mm height × 3.8 cm diameter
• ✅ Large: 160 mm height × 6 cm diameter
• ❌ Small: 80 mm (currently unavailable—comment if you’d like it tested)

Style

• ✅ Embossed
• ✅ Seamless
• ✅ One full repeat per roll
• ❌ Debossed: Not available (yet). Comment if you’d like it evaluated.

Custom Sizing (print at your own risk)

• Scale up → deeper grooves; scale down → shallower grooves.
• Medium & Large share the same designed depth—start from the closest size.

Tested Print Settings

• Layer Height: 0.16 mm
• Infill: 10% Crosshatch
• Perimeters/Walls: 2 (recommended for edge fidelity)
• Raft: Not needed on direct-drive; use a 3-layer raft on bedslingers (especially Large)
• Supports: None

Usage Tips

• Roll on soft/pliable clay for the cleanest edges.
• Light cornstarch dusting.

Handle

• Not included yet.