Zootopia Judy Hopps Articulated Figure

Zootopia 2 is coming soon, let's warm up. Last time I posted Nick Fox, this time it's Judy Rabbit. It also has full body articulation and movable eyes

Requires AMS multi-color printing. If you dislike the amount of waste, you can print in a single color and then paint it

There are also two replacement head sculpts (laughing and sad expressions). I will release them after testing in a couple of days

Each part is labeled with its name. You can view them in the slicer software and assemble by referring to the instructions

Insert a filament strand into the elbow joint as an axle. Before inserting, it is recommended to clean any overhangs in the holes. Some parts are small, so be careful during assembly. To ensure tight joints, some areas require a bit of force to assemble. When applying force, pay attention to the direction to avoid breaking parts. Also be careful when moving the joints. After all, these are not industrial mass-produced items, so their strength is limited (even mature products from Bandai and Kaiyodo can have broken axles, broken joints, or loose joints)

I printed and adjusted the joint tightness using Bambu Lab PLA Basic filament. Please avoid using PLA Matte, PLA Silk, or other filaments with poor layer adhesion on stressed parts, as they may break

Due to differences in 3D Printer and filament, the tightness of the joints you print may vary. Simple filing or a thin coat of super glue to increase thickness should be enough to adjust them

I have also made other things, feel free to check out my homepage if interested:

P1S Z-axis screw cover