Parallel stop for Festool guide rails
Print Profile(2)
Bill of Materials
- M8 Sechskantmutter x 2:
- 8,4 mm U-Scheibe (Für M8 Schrauben) x 2:
- M8 x 16 mm Sechskantschraube x 2:
- M6 Sechskantmuttern x 2:
- M6 x 16 mm Sechskantschraube x 2:
- M5 Sechskantmutter x 2:
- M5 x 12 Senkkopfschraube x 2:
- C-Profil 17x11mm für 8mm Schrauben x 2: Länge ist beliebig
Description
The goal was to realize the simplest and most inexpensive parallel fence for Festool guide rails.
A scale is not provided as I always mark on the board first and then align the guide rail.
Then I adjust the fence riders accordingly on the fence side.
For this, 2 aluminum C-profiles 17 x 11 mm for M8 nuts in any length were used.
These profiles are available from almost every online retailer.
Here are a few links as an example: (Advertisement)
*without price comparison*
See also attached SKETCH
Since the profiles do not need to be drilled, they can also be used for other projects..
Update from 12.10.2025: Assembly instructions added.
On the 2nd print plate you will find washers and star knob nuts.
Please print these without changes to the slicer.
At the correct height, the print will be paused.
Now please insert one M6 hex nut each, and make sure,
that the nuts are flush before you continue printing.
I wish you a lot of fun with the model.
I'm just starting to publish my designs.
Therefore, I would be very happy about a Like or even a Boost.
Boost Me (for free)
I'm old and I need the money. :-)
Documentation (2)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (22)