Kill Team - Killzone Moroch Storage
Print Profile(1)

Description
This allows to store all parts of Kill Team killzone Moroch in the two bunkers. This organizer prints without the need for supports.
For this to work, you need to have built the killzone as described in the build instructions. If you did, you have two buildings that, upside down, become the receptacles for these inserts. The inserts then store all the walls, connectors, and even the shutters (those extra pieces that you don't use.)
This terrain has also been sold as Battlezone Fronteris, and as Battlezone Fronteris: Nachmund, so if you own any of these, this may work for you. If you own Battlezone Fronteris: Nachmund then you have a second set of the stockades, and you will want to print a stockade box. This box requires assembly. You need to apply a good amount of force for it to go together. The six slots in the front of the box are for the 6 "windows" from the small ruin, that you will also have doubles of.
For the tower, I designed a box that protects the top of the tower, which looks like it's designed to snap off. It prints in place with hinges working without any need for assembly.
The slot for the radar dish is designed in such a way that it should work if your radar dish was glued in the top-bottom orientation. Also, if your dish is suck in one position, that should also work. But if you glued the dish assembly to it's base, this organizer will no longer work for you (you weren't supposed to! lol)
One of the pictures shows my stuff in a storage tub. I can't turn that tub upside down or throw it around. That's just not the goal of this organizer. But if you carry it right side up, your paint job should be well protected from scratches and wear.
You can find other Killzone organizers here:
- Tomb World
- Volkus (Hivestorm)
- Bheta-Decima
- Gallowdark
- Moroch
- Nachmund
- Chalnath
- Octarius
If a killzone doesn't have a working link, I am planning on designing an insert, but it's not there yet.
Boost Me (for free)
If you want my upcoming killzone storage designs to remain completely free, please support this model with a boost.
or consider putting a few bucks in my tip jar. Boosts and tips are never expected, but always appreciated.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
























Comment & Rating (20)