Repeatable Spiral Traversal Stone Pillar Print in Place Fidget Toy TD1 Pillar

This is a stone pillar shaped spiral traversal fidget toy.You can continuously flip and rotate it back and forth. It has an interlocking mechanism, so it won't separate, making it very stress-relieving.

Printing is super simple, Print in Place, no supports needed. You can play with it as soon as printing is complete, it's very smooth.

Three styles of different heights are available, with dimensions approximately: 42mm x height 88mm/120mm/150mm. You can select the desired plate in the print profile to print.

In this configuration, I've slowed down the printing speed to achieve better surface effects using aesthetic silk filaments under default parameters. If using basic or performance filaments, you can modify the printing speed for faster printing.

When printing tall pillar-like models, be sure to clean the build plate to prevent adhesion failures. Before printing, ensure the filament is dry. For devices with an enclosure, please slightly open the door; good ventilation and heat dissipation will result in a better overhang appearance.

Thanks to all that have downloaded, liked, commented, or boosted my models you don't know how much I appreciate all of you and please feel free to continue to do so.

Welcome to my folder. I will continue to update it with more fun and interesting stress-relief toys.

Planetary Gear Spinner

Helical toy

Ratchet toy

spinning top