sorry about that. I don’t have a one wheel so I made it for a friend. I couldn’t really do any testing and he just said it fit

Jonah

and it looks that it was fit for wtf rails so it makes a small difference 

Aaron

barely fit my pint x the holes are slightly to close,  really got to lift up the fender and do some pulling. make sure you get on side barely on so you can get the other side on. thanks for the print though only design that fit my A1 mini 

ahhvirgo

sorry about that, I just modeled it for a friend and he said it fit his fine. since I don’t have one I don’t have any way to test it personally 

all good, since its the only one that fits on the a1 mini, I'm gonna try to stop the second plate on layer 60 to use it as a spacer to fit the rear.

user_1613663833

looks awesome on the front of my onewheel but (side with the status light) doesn't work at all on the back side.

honestly I don’t know. I just made them for a friend. I’m not familiar with OneWheel

pint/pintx/pints all have the same sizing for a fender but idk about the wtf rails changing eneything

wiggles

didn't properly fit my pint x, had to find another print 

keenangood

0.2mm layer, 3 walls, 15% infill

it’s not meant for stock foot pads needs an adapter spacer or sthm might design one that works for stock if step files r released 

LordAppples

Message me, and I'll send you the STEP files. I tried messaging you, but it won't let me send anything else until you respond. 

Do you have the step files? I think these would look much better in a higher resolution so there is less of a stepped look on the final print

grahamburger

cover

tempImageKLwcdv.jpg

tempImageGhG8BV.jpg

plate_1.png

plate_2.png

2025-10-08_f96b8e07e4e1a8.jpg

<p>Pretty simple setting, it barely fits on an A1 mini though.</p>

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If this saves you time or money drop a boost!</boostcontent></boostme><commercialme><commercialtitle>Membership</commercialtitle><commercialcontent>If you wanna sell 3D Prints of my models, or just support my work, please purchase a commercial license. THANKS!!</commercialcontent></commercialme><p>Had a friend who asked if I could make these, so I did! They are just short fenders that protect your legs and the underside from rocks and stuff. They print in 2 parts with locating pins. Simply line them up and screw them on, and everything should come together. Mine printed in PETG and warped, however, they flattened out when I screwed them on! Enjoy!</p>

Print Profile(1)

Description

Comment & Rating (16)

License

Related Models

OneWheel Pint Short Fenders

Print Profile(1)

Description

Comment & Rating (16)

License

Related Models