Neptune 4 Max Bed Screw Locks (New Thicker Bed)

Around the screw holes or where you insert them anywayss:)

The bed frame has this extra thicknes (in lack of a better word) around the screw wholes. Will this not impact the overall precision of the calibration? I was considering making room for them in the upper part but thought to ask here first.

I came back to throw in a rating and comment! These have been a lifesaver with my Elegoo Neptune 4. I had to buy some longer screws because I don't use the springs but use a silicon mount, but these have worked perfectly with that. Tip for those out there, I tighten them up to midway between loose and tight and then open up AI and run a leveling run to get the output. I paste this into AI and advise that my current settings are XXX (output code pasted from bed level start to end) and that my leveling screws have clicks and 30 clicks = 1 full rotation. It may take 5 or 6 times of doing this and then hitting the auto level button again and again and posting the output code in, but my bed is as flat as can be and it told me how many clicks clockwise/counter-clockwise to turn. Great print!

Printed great and works great!