Print Profile(1)
Description
Clean, straight-line wall shelf designed to display challenge coins and poker chips without visible clutter. This single-row bar holds up to 5 coins/chips with comfortable spacing and a subtle front lip to keep items in place. Includes a flat backplate with visible screw holes for simple, secure mounting.
Highlights
- Capacity: 5 coins/chips (fits 39 mm poker chips and most coins up to ~50 mm)
- Dimensions (approx): 238 mm W × 40 mm H × 31 mm D
- Backplate: 40 mm tall × 6 mm thick
- Shelf: 25 mm deep × 4 mm thick
- Front lip: 2 mm
- Mounting: Two 6 mm through-holes ~18 mm from top/side edges (use wall anchors as needed)
- Style: All straight lines (no arch), minimal, modern look
Printing
- Orientation: Backplate flat on the bed, shelf facing up
- Material: PLA or PETG (indoor use)
- Layer height: 0.2 mm (typical)
- Walls/Infill: 3–4 perimeters, ~20% infill
- Supports: Not required (optional brim if your bed adhesion is tricky)
Hardware (not included)
- Works well with M5 / #10 screws (6 mm hole). Use washers and appropriate wall anchors for your surface.
Notes
- The STL is sized for 5 items at ~42 mm spacing. If you need more/less capacity, larger coin spacing, or different hole positions (e.g., to hit studs), scale or request a variant.
- Indoor display recommended.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)