Jrose2001

cover

2_46969cbc-d926-4ae1-8618-5b84da28d70c.jpg

1_def78f28-8649-4464-8998-72b5d0becfe4.jpg

4_671c86de-6532-48c1-b163-a3dc67c6228e.jpg

1564.jpg

11.jpg

12.jpg

14.jpg

15.jpg

1565.jpg

plate_1.png

This version 2 is .1 bigger to allow for thermal expansion of the battery AND more importantly, has a hole in the bottom to assist in removing the battery if it gets stuck. V1 has very tight tolerances.

Ver. 2     0.2mm layer, 4 walls, 15% infill

4_1f7084fd-33fc-494b-964d-0b4ba15974ea.webp

5_a488581d-8540-4704-af1f-618008123e03.webp

3_76f9baea-3f4e-414a-afcb-e46501a7d248.webp

1_6435c16f-b16a-4e07-ae47-0eed8dad7fe5.webp

I set this print to use slim tree supports although they are not really necessary. If you don't care about a slightly rough top of the hole, turn them off. I also set the infill to 40% to make the belt clip strong. You can also print this on its side to increase the belt clip strength. On an A1, it took about 2.5 hours.

Ver. 1  0.2mm layer, 4 walls, 40% infill

new apple battery holder_b9cc9d4b-6edd-4966-bf21-e162131d8b0e.webp

plate_1.webp

v1_411bd4b0-23fd-4449-9bf2-c337b500faf6.webp

v2_38820bdc-0834-4a4a-8f4d-2e78893bc1f6.webp

v3_b36d5d16-a18d-49dd-a70e-12c697f53d4a.webp

v4_03dc592a-a61a-41dc-aee2-16c64f655d6d.webp

This is a slightly modified version that allows you to use a small velcro strap to keep the battery from sliding out. I also cut out the sides so that you can see parts of the battery. There is a support blocker modifier to keep the strap slot from filling with trees!

Ver. 1    0.2mm layer, 4 walls, 15% infill

I downloaded an existing belt clip and it just didn&#39;t work for me. This is a more stylish version that is easier on the hands, body, and eyes.

Apple Vision Battery Belt Clip

ASIA

Print Profile(3)

Description

Comment & Rating (20)

License

Related Models