Cute Hipster Reading Ghost - Free 3D Print Model

Search models, users, collections, and posts

oOMILLSY3DOo

Miniatures>Other Miniatures

IP Report

Print Profile(5)

All

H2S

X1E

H2D Pro

H2D

P1S

X1 Carbon

A1 mini

P2S

P1P

H2C

X2D

A2L

0.16mm layer, 2 walls, 15% infill

Designer

3.1 h

4 plates

4.9(153)

0.16mm layer, 2 walls, 15% infill

Designer

13.6 h

1 plate

4.9(14)

Hollow body for tealight

1.3 h

1 plate

5.0(10)

0.16mm layer, 2 walls, 15% infill

8 min

1 plate

4.8(6)

Click to see more

Open in Bambu Studio

Boost

1872

4777

248

214

2.7 k

1.4 k

Released

Description

Cute Hipster Reading Ghost

I was asked to produce a reading version of the Cute Hipster Ghost by a family member and i thought you guys might like it too. Cosied up on a cold October night with a good book and a warm hot chocolate, this Cute ghost is perfect for decorating the house or desk during the spooky season or beyond. Printed in parts so NO AMS needed. The same size as the previous Ghost this Cute Ghost will fit in well with the others in your collection!

The book cover is thin so delicate, be careful when removing supports. Inside surface quality doesnt matter due to gluing in the book pages. The pages utilise a brim, but I dont feel you need to remove the brim from between the pages, just the outside as you will not see the bottom of the pages. Eyes have been adjusted so fit in well, marked with L and R corresponding to the Ghosts left and right not yours.

If you have any preferences on styles of hats I can make for you all so you can mix and match let me know. I hope you enjoy the latest addition to the spooky family!

NOT AI, NO AI COLOUR PICS WHICH DISGUISE A POOR DETAILED SINGLE COLOUR PRINT. REAL PRINTED RESULTS!

MOST OF MY MODELS ARE FAN ART RECREATIONS AND ARE FOR PERSONAL USE ONLY : MY MODELS ARE UNOFFICIAL FAN ART AND ARE NOT AFFILIATED OR ENDORSED BY THIRD PARTY IP HOLDERS

Thankyou to everyone who has rated and boosted my prints, if you like the models and want to continue to support the creation of more please consider boosting, it really does help incentivise the creation of more models for makerworld.

If you would like to "buy me a coffee" to support the continued creation of fun prints you can do so here;

All of my models posted here are free for you to use commercially for free. I make them as a hobby and a bit of fun, with the points helping supply filament and consumables. All i ask if you wish to support my designs and want to sell them is that you are aware of the IP infringement which apply to some of the models and take appropriate responsibility. Please also boost them as much as you can and help with the points and please correctly attribute the model design to this page in your descriptions etc - Thankyou again everyone!

Boost Me (for free)

If you like the model please consider boosting to support the continued creation of fun and exciting prints.

halloween 2025

halloween 2025 competition

Halloween

halloween

halloween ghost

halloween ghost 3d model

halloween ghost decoration

reading ghost figurine

Comment & Rating (248)

@lwmz68

Boosted

Very nice model I have also designed a few parts for the sleeve

The designer has replied

Show original

@lwmz68

Boosted

Should I send the designed sleeve parts anywhere

Show original

@Millsy3D

you could upload them as a print profile, that way others can print them if they want and also u might earn some points out of it?

(Edited)

@tech2nology

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

It's so cute! I just could not get the book to print, failed a few times. LOL

The profile uploader has replied

@Millsy3D

ah man, maybe slow it down and make the brim bigger and make sure the slicer is setting the wall gen to Arachne

@Freddy_LexusIS

where did you get .stl for under the arms part? I’d love to add it to my model. TYIA

@tech2nology

Boosted

Replying to @Freddy_LexusIS :

The 3rd profile on the list by @iwmz68

@VariableGrip

Boosted

Cute! I printed both the separated and AMS files, all with default settings on an A1. Supports were easy to remove. For the separated one, it might be a little better to adjust the angle of the hat so the majority of the bottom is flush with the build plate. For the AMS, it came out well except that the 4 back pages are not connected; you can see in my picture that 2 fell out and 2 are floating.

The designer has replied

@Millsy3D

I will have a look at the file and see if I can adjust the AMS version. Thank you for the feedback! I imagine changing the wall generator to Arachne rather than classic will probably solve that issue due to how thin the pages would be.

(Edited)

@VariableGrip

Boosted

Replying to @Millsy3D :

I just noticed the AMS profile is smaller than the split one as well so maybe printing it at the same scale will help. Sorry I didn’t rate it on my comment, I couldn’t figure out how to do it in the app UI but I just found it. I used this guy as my test print on my new machine.

@VariableGrip

Boosted

@amiller actually I think maybe only the book is a different scale. I think the book in the separated file is too large. I was having issues fitting it into the notch and that might explain why others are having issues gluing the book in the comments.

@GretaunderFuchs

Boosted

The ghost prints super well. I personalized it and gave it to an author for her reading ☺️ Thanks for the great file

Show original

@MGDio

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

I printed at 70% I had a problem with the book cover - it was too small Otherwise the model is great

The profile uploader has replied

Show original

@Millsy3D

I have had someone tell me it was too big now it's too small, I'm very confused. lol I will have to do another tester and see what is happening.

(Edited)

@MGDio

Boosted

Replying to @Millsy3D :

The cover was too thin at 70%. I didn't want to reprint it anymore, it's still such a great model

Show original

@Freddy_LexusIS

Replying to @Millsy3D :

It will only affect while scaling down. They need to turn off “Uniform Scaling” and manually reduce the Z Scale and X Scale with out adjusting the Y scale which would make it thinner and harder to print.

(Edited)

@Angelus000

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Super cute print. Everything glued together well. Book was probably the bigger challenge. I used a mini clamp to hold the pages into the brown spine, and came together nicely. I assume you could get away with not using this method, but I wanted the pages tight. Great design and easy print.

The profile uploader has replied

@Millsy3D

Thankyou so much, I was torn between an easier to assemble design for the book, but i wanted it to be more unique with seperate pages. I could have gone with a plain white slab but i think the design looks better like this and I just held it together for a few seconds while my glue set. Hopefully others will feel the same. Thankyou for the awesome feedback and the boost.

(Edited)

@mgb66

Print Profile

0.16mm layer, 2 walls, 15% infill

Very nice model, a really sweet, well-read ghost 😃 The model was also easy to print Thank you very much 👍🏻

(Edited)

Show original

@sammy707

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Great model The kids love it I would recommend printing the eyes and sleeve inserts on a smooth PEI plate otherwise you will see the texture

Show original

@user_3477882680

Boosted

Thank you for the beautiful design. It is really an icebreaker having this on my work desk and having people commenting about the cuteness of it. thanks :)

(Edited)

@sjenny

Print Profile

0.16mm layer, 2 walls, 15% infill

he is soo cute. one of my favorites

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Comfortable Bookmark Page Holder

Asphalt3D

26.9 k

6 k

Zipper Bookmark

Modelicious Creations

28.1 k

10 k

Aztec Death Whistle

Travis

53.7 k

7.8 k

Cute Halloween Hipster Ghosts

oOMILLSY3DOo

803

605