IKEA BILLY Bookcase Accessories Pegboard Cabinet Door Connecting Hanger (Compatible with IKEA SKÅDIS Pegboard/AKURUM Cabinet Door)

Version History:

• Version 1.0: [Basic Connector Model Generation] Meets the basic functional requirements for pegboard door mounting (connector load-bearing capacity not tested; if heavy items need to be mounted, it is recommended to print more connectors for securing)

Design Philosophy:

• IKEA SKÅDIS pegboard original accessories only support wall mounting, and the connectors sold by IKEA can only be fixed to flat surfaces or desktops. If you also want to fix the pegboard to a BILLY cabinet door, you can print this connector for door mounting.
• The connector uses double hooks for fixing, requiring no other accessories. Simply print the connector to secure the pegboard (supports third-party pegboards with the same hole pitch, size, and spacing as the IKEA SKÅDIS pegboard, including some 3D printed models on this site).

Compatibility:

• Bookcase: IKEA BILLY Bookcase
• Cabinet Door: IKEA OXBERG Cabinet Door

Model Configuration:

• Printing: This model defaults to printing 1 connector. For each pegboard door mount, it is recommended to use at least 2 connectors for securing. If heavy items need to be hung on the pegboard, be sure to increase to 3-4 connectors for securing.
• Filament: To enhance connector strength and pegboard load-bearing capacity, it is recommended to print with PETG or a higher-hardness filament. A single connector requires approximately 24.8 grams of filament (the configuration already includes support for the connector hooks, which can be printed directly using the Bambu Handy App).