A (much) better holder for your Led Strip (For A1)

I've printed mine in PLA but i highly encourage you to print yours in PETG for better heat resistence. You must remove the camera privacy membrane before intalling this to get a snug fit, simply place the membrane verticaly and pull it out, you can install it back if you want since this is not a permanet mod.

Two versions available: OPEN and REDUCED view. It does what it says, use the open view for full visibility or the reduced version for more privacy (it covers about 10% on the left side) and some camera bump protection.
 

This is the led strip i've used: https://pt.aliexpress.com/item/1005008785146522.html?spm=a2g0o.productlist.main.5.2b79VzlmVzlmpx&algo_pvid=3be917bc-6828-4b8b-996c-8862778cff13&algo_exp_id=3be917bc-6828-4b8b-996c-8862778cff13-4&pdp_ext_f=%7B%22order%22%3A%2276%22%2C%22eval%22%3A%221%22%2C%22fromPage%22%3A%22search%22%7D&pdp_npi=6%40dis%21BRL%2121.82%2119.62%21%21%214.07%213.66%21%402101e83017779071505567278ebe88%2112000046655688286%21sea%21BR%21716569842%21X%211%210%21n_tag%3A-29919%3Bd%3Afff6675d%3Bm03_new_user%3A-29895&curPageLogUid=Lx5I5JqegPwY&utparam-url=scene%3Asearch%7Cquery_from%3A%7Cx_object_id%3A1005008785146522%7C_p_origin_prod%3A

IMPORTANT: Saddly this modoel is only compatible with the A1 as others has pointed out in the comments, so if you have an A1 mini, don't waste your fillament trying to print it, sorry.

Feel free to share with the community if it does or doesn't fit your sensor, in my case it was a perfect snug fit but it depends on how your sensor PCB was cut, you might have to sand a very little amount of the edges to get it to fit right or maybe grind the printed part.

I hope you like it as much as i did!