Rugged LTT Screwdriver Bit holder - 60 bits - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

darerekt

Tools>Hand Tools

IP Report

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

3.4 h

3 plates

4.9(45)

0.2mm layer, 2 walls, 15% infill

Designer

3.8 h

3 plates

5.0(5)

Open in Bambu Studio

Boost

145

382

538

355

Released

Description

I've uploaded an updated “v2” version of this with a slot for the bit extension, and it's also around 20% thinner. The tolerances are fairly tight, so I wouldn't suggest magnets in this version, but maybe a piece of felt in the top if you want it to be silenced.

BOM - 6x 20mm M3 screws and optional felt/foam for the top lid

This is a remix of a model that I found that had some really good features, but I just wanted to tweak a bit. This uses 6x M3 20mm screws to hold it together. Please use common sense for which face to place these parts on.

I suggest a bit of foam or felt in the top section to keep the bits quiet and to prevent them from moving around.

eSUN Bone White PLA+ is very close to the beige color of Noctua, and Overture Brown PLA is close, but not quite on.

Disclaimer: This project has no connection with LTT.