Leatherman - Galvanox Bit Extension Ratchet Holder

UPDATED:

Following a request, I added a second model to the profile:

Galvanox also has a ratchet attachment for the flat bit driver on Leatherman multitools… I have added a slot to fit this ratchet, and it works well with both the short and the long extension bits from my original model!  Everything is still nice and snug, and the print settings have remained the same for TPU filament!

I hope you enjoy the new addition, and the old model with just the extension bit slots is still included should you wish to print that one instead!

ORIGINAL POST:

I ordered a driver bit + extender set (Galvanox) for my Leatherman Wave+, and I really wanted to keep the whole kit on my belt with multi-tool.  

This holster was designed to be comfortable, light-weight, and secure.  I believe this checks all of those boxes. There is a retention ring at the top of the bit holder to keep it securely in place, and the socket extensions are sized with zero clearance. These bits will never fall out by accident!

Printed in Bambu 90A TPU, its soft yet tough, and holds all the parts very securely on a belt (Up to 2").

Tolerances are tight, and after printing it will seem too grippy, but after a few times of inserting and removing the extension bits, they will loosen but still retain a secure grip. (I tried really hard to not make it sound R rated lol)

Print it upside down, and with support. The included profile should work for any TPU, but let me know if there are any issues.

Print slow to make sure the belt clip section doesn't move too much while printing.

I've included some screenshots from Fusion as some of the details may be hard to see in the black TPU I printed it with.