Iphone 17 Pro Case Mclaren Formula 1 - Free 3D Print Model

Search models, users, collections, and posts

whatupdoc

3D Printer>3D Printer Accessories

IP Report

Print Profile(1)

All

P1P

H2D

H2D Pro

P1S

X1 Carbon

H2S

P2S

X1E

A1 mini

H2C

X2D

A2L

0.16mm layer, 2 walls, 15% infill

Designer

2.8 h

2 plates

3.8(10)

Open in Bambu Studio

Boost

224

464

564

233

Released

Description

This is a iPhone 17 Pro case with added McLaren logo

Exterior printed using 95A TPU on 3D Effect plate to give carbon fiber appearance

-Recommend Cleaning smooth build plate prior to use, glue stick application is not required but can increase adhesion. I do notice effects seem diminished with glue stick.

-Recommend drying TPU prior to use

-Updated to add supports around buttons, which allows for smoother finish to final product

Interior shell (camera protector) printed in Orange PLA

-Printed interior shell on textured PEI plate

Recommend pulling edges on side of case around the entirety of phone should snap fit into place, this model has been tested and does fit, will require you to pull however each edge to completely fit phone into case.

a remix of below, okayed by designer

iPhone 17 Pro High precision phone case (honeycomb and flat-bottom versions, including STEP) by sky2024 MakerWorld: Download Free 3D Models

Comment & Rating (57)

@Winaz

Super case! It has already had the chance to protect my phone from a huge fall on my bike and my phone came out unharmed

The designer has replied

Show original

@whatupdoc22

looks slick, enjoy!

@Ela_Fant86

Print Profile

0.16mm layer, 2 walls, 15% infill

Phone doesn't fit at all..... sticks out 2 mm at the top buttons don't fit.... and yes TPU and PLA used for orange... Orange 1-2 layers too high!!!!

The profile uploader has replied

Show original

@whatupdoc22

try pulling edges over the side should snap fit

@Ela_Fant86

Replying to @whatupdoc22 :

The problem is the left and right sides The button on the right is only half visible through the opening I can pull as much as I want because it doesn't stay up or hold

Show original

@whatupdoc22

Replying to @Ela_Fant86 :

If you are using TPU for exterior and its 95A it should be flexible enough to pull exterior around each corner of phone and will snap in place. this has been test printed a few times and yielded same results.

@GHOST78

need pro max please amazing 😻

The designer has replied

@whatupdoc22

ill work on it

@GHOST78

Replying to @whatupdoc22 :

thanks pro 👍

@SuperArmyS

Replying to @whatupdoc22 :

Hey did you ever make a pro max version?

@user_2856882970

can you print this on other machines other then bambu

@japaan

You would have to be able to do it, so try it out

Show original

@creativeelahi

please do Ferrari

The designer has replied

@whatupdoc22

just finished check profile

@creativeelahi

Replying to @whatupdoc22 :

wow, thanks

@cmallen

just did the print having a hard time getting my phone in it any tricks ?

The designer has replied

@whatupdoc22

assuming you used TPU for exterior case it should just fit on without difficulty. if you used pla filament the rigidity would pose a challenge to fit the case on the iPhone 17 pro.

(Edited)

@cmallen

Replying to @whatupdoc22 :

coy that I used pla thanks man loved the print though

@bdjohnsn

can you do Red Bull Oracle

The designer has replied

@whatupdoc22

sure, when I have some downtime I’ll put one together.

@whatupdoc22

going to upload a red bull profile soon, i just want to test print it first

@user_3965690354

how do I take it off it’s so hard and tight

@user_3965690354

pls help

@user_2856882970

can you print this on other machines other then bambu ?

The designer has replied

@whatupdoc22

I haven’t tried but should be possible if you can open in that printers native slicer program. Bambu uses 3mf files and you might have to convert it somehow or save as an stl file in Bambu slicer then transfer.