NEW GLENN (NG-1)
Print Profile(4)
Description
I'm looking to improve the publication of my models on makerworld, if you like or dislike my models and if you have 5 minutes to lose, can you please fill out this form.
Boost Me (for free)
If you can, please feel free to boost my model so that more models will arrive! 5...4...3...2...1...0...Liftoff !!!
Membership
If you like my 3D models and want to take part in this journey into space, subscribe today! Your support is essential to help me expand our collection!
Description
The New Glenn model is a highly detailed 1:200 scale reproduction of the first orbital rocket of Blue Origin, which made its first flight on January 16, 2025.
The finished model dimensions are approximately 49 cm high and 8 cm wide.
Printing
- There are 38 parts to print, the total printing time for the entire model is approximately 9 hours.
Choosing your configuration kit.
There are multiple configuration kits available for this model, depending on your printing and assembly preferences.
Files (.Zip)
- Kit with Fuzzy Skin (Full Rocket with fuzzy skin texture on the second stage)
- Kit without Fuzzy Skin (Full Rocket without fuzzy skin texture on the second stage)
- Stand Multi Parts (Stand for one color printer)
- NEW GLENN or NG-1 plate
- Stand Multi Color (Stand for Multi color printer)
- NEW GLENN or NG-1 plate
Printing Guide
- For Flap_Silver_x2 parts, you must use the Arachne generation.
- Nameplate AMS
- Nameplate can be printed with a multicolor system, but also with a color(M600) change at layer 14.
Tips
Settings
- For infill, 15% is sufficient for a decorative object, and you can also use "Lightning" infill settings. .
- For the base, it is recommended to print with 3 perimeters to avoid visible infill.
- If some parts are loose or don't fit, you can change the scale by +/- 1% in the slicer to get a better fit.
Printing
- For a better final result, I recommend printing the Jonction_Block last so that you can adjust their size according to your print and have a better fit during assembly.
Post Printing
- You may need to sand the junction areas between the parts for a smoother finish.
- I recommend using glue for better strength and durability.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (71)