Search models, users, collections, and posts
Print Profile(1)
0.2mm layer, 2 walls, 8% infill
Designer
8.3 h
1 plate
Open in Bambu Studio
Boost
193
356
24
11
224
101
Released
Description
Cursed Pumpkin can holder
- Fits long EU cans with a capacity of 0.5L. You can also use my insert for 12oz or 330ml (slim) cans (link below)
- Recommended print settings: PLA, 0.2mm layers, 2walls, 8%gyroid, Automatic Tree supports (at least 28°)
- I recommend adjusting the supports according to the picture below.
- If you want to have the handle on the opposite side (left-handed), just right-click on the object in the slicer and put mirror by the Y axis.
- Be careful when removing the supports arount the teeth
Here is the link to my model of the insert that you can use in 0.5L holders with your 12oz , or 330ml slim cans, and 10mm riser if you want better access to the top. They are scalable, so you can make them smaller or larger in your slicer.
Happy printing:)
License
This user content is licensed under a
Creative Commons Attribution
Comment & Rating (24)