Meliodas Hueforge

Highly detailed 3D-printed Meliodas picture 🐉🍻
Printed with vivid contrast and fine textures 🎨⚔️, this artwork brings the Dragon’s Sin of Wrath to life in stunning detail. Perfect for display in an anime collection, a gaming room, or as a unique gift for any Seven Deadly Sins fan.

🖨️ Print Settings

Print at 100% infill with a layer height of 0.16mm and a base layer of 0.20mm
The Model is 200 × 112.5mm in size 📏
You may print at higher layer heights below the Base Thickness of 0.52mm
The Max Allowed Thickness is 3.24mm and the Actual Thickness is 3.08mm

🎨 Filaments Used (5 unique filaments)

🖤 #080a0d PLA PolyLite Black – Transmission Distance: 0.3
💜 #5400fd PLA Elegoo Purple – Transmission Distance: 1.3
🤎 #fec98b PLA Spectrum Beige – Transmission Distance: 5.8
🤍 #ffffff PLA Elegoo White – Transmission Distance: 8
💛 #ffee07 PLA Elegoo Yellow – Transmission Distance: 5.6

🔄 Swap Instructions

• Start with Black 🖤
• At layer #5 (0.84mm) swap to Purple 💜
• At layer #15 (2.44mm) swap to Beige 🤎
• At layer #18 (2.92mm) swap to White 🤍
• At layer #19 (3.08mm) swap to Yellow 💛 for the rest
   

(I have colored the hair and the small sword in his hand with a paint brush

 but it takes 4 minutes so not that much of a work and it will be good enought without it <3)