Johnny 5 V3

This model is an update to my Johnny 5 V2 Upload.

I really loved the original model that was uploaded. The only issue I had is that I didn't want to glue the treads, but if I didn't they fell off easily. I decided to modify the model so that the treads can be connected, and have slight movement without them falling off easily.  See pictures for the modification made. 

Updated 10/05/25: This is updated from the last model I uploaded.  I changed the print orientation on some parts to allow for much easier support removal.  The tolerances have also been updated to allow for assembly without glue.  The “eye brows” will still need to be glued on. The last thing is I included a version of the head that closer resembles what Johnny 5 and the other robots look like at the beginning of the movie. (The plate picture shows on tread down. I remove it before remembering to take a picture, aka I was excited to put it together)

Thanks to AVGCZ2 for the original upload to Maker World. Please consider giving them a boost as well if you have any to spare.