Switch lever for Miele S4000 vacuum cleaner

💡 Don't throw away your Miele vacuum cleaner because of a broken button anymore!

This replacement lever is the economical and durable solution to repair your vacuum cleaner's On/Off switch. A simple repair that will give it a second life!

Why print this part?

• 💸 Economical: Avoid buying a new vacuum cleaner for a small plastic part that only costs a few cents to print.
• 🔧 Easy Repair: Designed to directly replace the broken original part, with no modifications necessary. This is part #60 on the exploded views of Miele S4xxx vacuum cleaners.
• 💪 Robust Design: Print it in a resistant material for durability equal to or greater than the original.

Compatibility

• ✅ Tested and validated on: Miele S4412 vacuum cleaner.
• ❓ Probably compatible with: Most models in the Miele S4000 series (S4xxx).
• 🤝 Your help is valuable: If you test this part on another model, leave a comment to help the rest of the community!

Printing Tips

• Recommended Filament: PETG, ASA or ABS. These materials provide the necessary mechanical strength for this part.
• Not Recommended Filament: PLA might be too brittle for the stresses the lever undergoes. There is also a risk of heat creep.
• Infill: I recommend at least 50% to ensure excellent solidity.
• Orientation: Be sure to properly orient the part on the build plate so that pressure forces are not applied along the layer lines, to avoid breakage.