Booster V3 / 1:100 SpaceX - Free 3D Print Model

Search models, users, collections, and posts

Larsvommars

Hobby & DIY>Vehicles

IP Report

Print Profile(2)

All

P1S

P1P

H2D

X1E

X1 Carbon

X2D

H2S

H2C

P2S

H2D Pro

A2L

A1 mini

0.2mm layer, 2 walls, 8% infill

Designer

22 h

6 plates

4.9(52)

1:144 SCALE [0.2mm, Scaled to 69.44%]

10.8 h

5 plates

5.0(3)

Open in Bambu Studio

Boost

409

845

143

112

1.1 k

565

Released

Description

Content has been automatically translated.

Show original

Model of the Super Heavy Booster V3

Scale 1:100

High quality I have tested it with various wall thicknesses

The cleanest print is achieved with separate outer walls and infill

Print all parts and assemble them the order is self-explanatory

Good luck

18.05.2026

File has been revised

Engine section design has been refined and the color scheme adjusted

Hotstage ring has been reinforced for better prints

Control hatches have been modified and separated

For better understanding here is an exploded view

Matching upper stage (Starship)

Matching launch facility

Comment & Rating (143)

@BrandStudios224

had to reprint some parts but mostly myself being rough w it.great model hope to see V3 ship soon to pair w the booster(in progress)

@user_1034994308

Where did you get the humans for scale?

@BrandStudios224

man in suit, scale M=1:100 <- (copy that) 1st print after search

@user_2661490007

Which silver did you use? I used sunlu silk pla+ but doesn't look this good...

@user_3344543322

I keep having issues with the hot staging ring posts. most print fine but a few get knocked over and create a mess. any suggestions. Everything else is priming perfect. great design details! Can’t wait for more designs!

The designer has replied

@larsvommars

what material do you print with

Show original

@user_3344543322

sunlu PLA silk

@user_1389823164

Replying to @user_3344543322 :

Having the same issue. Many posts print well, but I cannot get a clean print. Using the same Sunlu Silk Silver PLA. Tried all kinds of adjustments in settings and slowed the whole thing down to about 25% on my K2 Plus and still no luck. I added supports to the upper ring because in earlier attempts the filament bridging across was pulling on the posts and breaking them off.

@katystudttower

Boosted

I am duplicated on Booster V3 in sections 2 and 3 you forgot You can make others on Bambu Studio Many thanks

The designer has replied

Show original

@larsvommars

Sorry I just corrected that

Show original

@katystudttower

Boosted

Replying to @larsvommars :

😊, BoosterV3 is appearing on the plate, it's fine. We have no problems. We are happy. I have many Starships and Boosters, also Tower Mechazilla with OLM. I am interested in your beautiful Starbase. Perfect. :-)

(Edited)

Show original

@katystudttower

Boosted

Replying to @larsvommars :

My 3D printers are here. I do my own model building. We'll see my model finished then, we'll just have to wait. Okay

Show original

@mariomart

Excellent model and printed great. I've mounted mine on a board with a base as I don't have room to display the full tower and launch mount. Added the moon for effect (and NO it's not upside down, that's how it appears here in Australia). Thank you.

@Carsten1985

Print Profile

0.2mm layer, 2 walls, 8% infill

mega

The profile uploader has replied

@larsvommars

now only the starting system is missing

Show original

@Carsten1985

Replying to @larsvommars :

For booster v2 I have an olm😅

(Edited)

Show original

@larsvommars

Replying to @Carsten1985 :

yes super

Show original

@user_1712379348

Great models. Very detailed and easy to assemble. I especially like the no glue design. I scaled the booster and ship to 50% to save filaments and printing time. Turns out it’s not an easy task! I used more than 100 grams on the raptor engines and catching pins, because they become too fragile when shrunken down. Support filaments only make things worse. Still exploring different settings. Appreciate any ideas.

@Starman201

Boosted

Hey, would you be so kind to share the settings you used to achieve the print of the struts used for the integrated hot staging ring? I tried to scale the model down as well to around 60%, but my printer doesn't seem to get it right, even though I'm using a 0,2mm nozzle and extra slow print speed

@user_4026045027

Replying to @Starman201 :

I have a 1:200 IHSR model if you need it. I reinforced the existing one slightly to make it work

@user_3167849865

Replying to @user_4026045027 :

Because flight 12 is soon, I created a more robust hot staging :) with larger support https://makerworld.com/fr/models/2823404-hot-staging-remixed-booster-v3-1-100-spacex#profileId-3144636 fully compatible with this booster.

@moustikee

Boosted

Print Profile

0.2mm layer, 2 walls, 8% infill

very detailed booster but there is a problem with the hot staging ring: the rods are too thin and break before the top layer prevents them trom doing that

The profile uploader has replied

@larsvommars

which printer and material are you using

Show original

@jcardea

i'm having same problem...i have done four diffent tiem with everything i know and the just break off. I have Flashforge 5M Pro runninf their Silver silk. all other item printed great. Las ttyr was very slow with solid infills....took 14 hour but failed. NOT good

@Louietotoro

same issues here as well I assume nobody found a fix for this? I took it off the plate and the rods instantly fell off they were hardly even attached on the printer bed..

@user_2702726221

Print Profile

0.2mm layer, 2 walls, 8% infill

printed at 160%. Everything snapped together except the fire ring that I had to reinforce to print. Amazing print I have never been able to upsize a model this much and not have problems. I will add a picture of it when I finish it. Getting double boost.

@DIYmoto

Print Profile

0.2mm layer, 2 walls, 8% infill

This model was fantastic to print. The only setting I changed on my H2S was to slow down the outside layer to 50mm/s. All plates printer perfectly the first time. Great model!

@user_2738914461

What brand of filament?

@DIYmoto

Replying to @user_2738914461 :

That is Polymaker PolyLite PLA in Silk Silver

Show original

@katystudttower

Boosted

I am creating a Booster V3 3D model of the A1. We are happy. We are satisfied. It is B19 V3. 😉 I am first trying the engine unit Raptor test from the 3D printer, it works. We have no problems. perfect 👍🏼🚀😊

Show original

@Nathan_SRR

I really liked your base, it would be interesting to put it up without breaking the motors, how can I get it

Show original

@katystudttower

Boosted

You can watch my motor. But it is 0.16 mm layer height and slow 35mm/s and support. You try to watch the motor. 😉 We hope to ...

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.