Orbital Sander Disc Holder 125mm 5 Inch 1-4x
Print Profile(6)
Description
English below → This model is for 125mm!
(Click here for 150mm / 6 inch)
Wall and bench stand for sanding discs for random orbital sanders AND cutting discs / grinding discs for angle grinders
The stand is available in 1x, 2x, 3x, and 4x versions
The compartments are approx 55mm wide, so each compartment can hold a large number of discs
The holder can be placed on a table or workbench, but can also be mounted on the wall
There are holes in the back panel Two screws should be sufficient per holder
The wall thickness has been adjusted for 0.6mm and 0.4mm nozzles
For 0.6mm, the walls are printed with 4 lines (2.4mm thick) and for 0.4mm, 2x3 walls are printed accordingly
The bottom is also printed with 6 layers at 1.44mm with a layer height of 0.24mm
IMPORTANT Prints WITHOUT supports
Slicing with Arachne wallgenerator, instead of classic will reduce the print time significantly
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (114)