Articulated Skeleton Cat
Print Profile(4)
Bill of Materials
Description
ℹ All my 3mf files are coming with pre painted Supports for the Head!
ℹ Yes it can stand!
ℹ Tips for printing:
- Filament: PLA
- Supports: Yes! Only for the head!!
- Layer height: 0.16mm
- Wall loops: 3
- Infill: 15%
- Seam position: back
- Wall generator: -
- Detect thin walls: -
- Brim: Normally No! But if you have any problems with adherence to the build plate I would recommend a brim!
- BuildPlate: Smooth (Textured Build Plates not recommended!) Use a build plate that you know has good adhesion!
- Info‼: Do not scale the Cat any smaller otherwise the connections will no longer work!
- Info‼: If you apply too much force to the legs they may break because the connections are small!
- Info‼: Please be careful when removing the Cat from the print bed!
------------------------------------------------------
❌‼Disclaimer‼❌ These files are provided for personal, non-commercial use only! This model is not suitable for young children or pets! Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.
------------------------------------------------------
Colors and filament I used (1 Color):
- PLA Matte / Bone White
------------------------------------------------------
Boost Me (for free)
If you enjoyed this model, please consider boosting it to support me to further develop creative and more cute looking designs🥰. Thank you!
License
Comment & Rating (57)