Corny Keg Tags|Co2+Beer|Dirty+Clean|Numbers + MORE

I saw a lot of models out there for the corny keg - but nothing was quite right in my mind. So I took inspiration and have done all the models for naming and managing corny kegs into one project.

Another big reason I wanted to design this model is because no other models can fit onto the old style keg posts with 12 points (The old style Co2 out posts). This model has got the 12 points for all the co2 out and beer in posts so there is more ways to rotate them.

I printed these in two colors (On the A1 mini without AMS (I added a pause and changed filament)) But these can easily be printed in just one color.

In this project there are:

• 17mm Keg post tags (Co2 IN and BEER OUT)
• 22mm Keg post tags (Co2 IN and BEER OUT)
• Keg numbering tags (Put on to the PRV post)
• A bunch of tags to mark your kegs: Clean, Dirty + Type tags such as: Beer, Water, RTD and Cleaner
• I also wanted a way to store all of the tags that aren't being used so I created a wall mount to store them.

INSTRUCTIONS:

Keg post tags:

• Simply print the tags and they should slide onto the keg posts no problem

Keg number tags:

• Remove the key ring that is on the pressure release valve on the keg lid and slide the tag onto it. Then simply re install the key ring.

Other tags:

• The way I was mounting these was opening the feet on the lid then sliding them on as seen in the photos. However these do fit onto the keg posts so that is another option.