Vault Dog House (Fallout 76)

This dog house was introduced in Fallout 76 Season 22 Modern Living. I loved the look of it and decided I wanted to model it and this is it. This would be the clean pre apocalyptic version. At some point I might dirty it up and give it some texture. But of course you can do that with paint. 

It is split into 5 parts so it will take some assembly. This was done so there was no need for a multi material system. The model is very tiny so I was not able to put in connecting helpers. There is a MMU version of it with only three pieces for those who want less assembly. 

For those without an AMS if you print them in order plate 1 then 2, 3 and then 4. You will have less swaps to do. The first plate ends in blue the second plate starts in blue. The third plate ends in yellow, the 4th plate starts in yellow. 

Please note the size, it is very tiny if you want it bigger it should be perfectly fine sizing up (just watch the layer size in the z height on plate 4) you will have to change the layer swaps. 

This profile does not have ironing turned on but if you have an ironing setting that you have tuned, it definitely could smooth it out. Only on plate 2 and 4.

Assembly is is easy to figure out be looking at the pictures.

No supports needs but the helper tabs.