Slanted angled funnel (in vase mode)

This model is designed for hard-to-reach places with small inlet openings. For example, to change the gear oil on a geared motor in a large machine

The funnel has a filling neck of approximately 140mm and an outlet pipe with a diameter of 13.5mm, making it suitable for many industrial gearboxes with their 14mm drain plugs. If it doesn't fit, simply scale the model down until it does

The print can be done without support structures and must be printed in vase mode (without infill and without top and bottom layers). This makes it very time-saving. Perfect if you need a quick solution

It can be printed without problems with a 0.4 nozzle, but the wall thickness should be increased to 0.7 - 0.9 mm (which is easily possible with a 0.4 nozzle), as it is printed with only one wall thickness

!!!Attention!!! Please use a filament that has very good layer adhesion, such as “PLA Tough+”. This way, you will have it for longer if it doesn't break on first use. It would work with any filament, but then it would be a disposable solution

Update: Version 2 with a larger filling funnel and tapered outlet

Happy printing and I hope it's as useful for you as it was for me ;-)