Guts Racing Keychain

P2 Printing Presents!!

The Fidget Infinity Cube V2!

Remix

An addictive fidget toy that you won't be able to set down! Prints in one piece and works right off the print bed.

Note: vertical hinges will be stiffest after printing, but break in after a bit of fidgeting!

Printing tips

• optimized for 0.2mm layer height and a 0.4mm nozzle
• 10% infill is plenty, but up to 100% infill increases the weight, which is super satisfying!
• part cooling on 100% fan speed (except first layer)
• vertical shells on 2+ perimeters for strength
• Cura users: disable No Skin in Z Gaps under your Shell settings

Variations

• yafic_v2.stl is the original – easy to print & loved by many
• yafic_v2_rounded.stl has rounded edges – more difficult to print, but nicer to hold
• yafic_v2_rounded_topjointmod.stl has modified top joints – prints better on some (fast) printers
• yafic_v2_test.stl is a smaller test file – use it to try out print settings

This is a keychain for the company Guts! If you don't know what Guts is, they make seat covers for ebikes and dirtbikes. To all my riders with Guts you will love this keychain!