Soap Dish with Lid (Print in Place)
Print Profile(4)
Description
Boost Me (for free)
If you are satisfied with the print, please boost me
A Print in Place soap dish with a lid and drainage
1. Internal dimensions: 120*75*37mm, the box is Print in Place, the hinge is smooth, the model has been modified many times, and this version is the one I am most satisfied with
2. Both PLA and PETG can be printed, I tested PLA Basic, PLA Matte, PLA Lite, PETG Basic, PETG HF, among them, PLA Matte and PLA Lite performed the worst, PETG HF came in second worst, it is recommended to use PLA Basic and PETG Basic for printing
3. Versions with and without a hidden clasp have been uploaded, however, it is highly recommended to print the version with the hidden clasp, because this hidden clasp is designed to be very smooth, the lid can be easily opened with one hand, and holding the lid alone will not cause it to slide open
4. The model requires very few supports, supports can be omitted with minimal impact
5. To accommodate various sizes of soap, due to the larger design, small circular pads have been added to prevent warping
6. The divider is printed separately, you can use a small amount of glue to attach the divider to the box, or not at all
7. The box is designed with many small details, if you pay attention, you will discover many small surprises
8. Supports A1 mini
9. Only one thing to note: dry the filament before printing, wash the build plate with dish soap, if necessary, you can spray some glue, and after printing, wait for the model to cool down before removing it
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)