Minimalist Clicker – Small but Addictive!

🔒 Important: The majority of the models I offer are based on licenses or brands belonging to their original creators. They are therefore intended for strictly personal and non-commercial use.

🍻 Want to use a model for commercial purposes?

I simply ask for a small gesture for the time invested in modeling:

💬 Buy me a virtual beer (€2.50 where I live!)

You can do it via PayPal right here ⬇️

🙏 Thank you for respecting the work, and for your support!

https://www.paypal.me/clairenteau

📝 Description:

I designed a minimalist clicker 🟣🟢 with a simple and clean design.
Compact and lightweight (only 3.70 g ⚖️), it easily slips into a pocket or attaches as a keychain 🔑.
A fun and essential little gadget for discreet relaxation 😌👌.

Simply insert a mechanical keyboard switch (I chose the blue version 🔵), then assemble the two pieces: the upper part clips on easily, the assembly fits into the base, and it's ready!
👉 Fast printing, filament-efficient, and practical with its integrated loop.

I also made a version of the famous small brick brand

available here👉  Clicker Keychain brick / brick 1, 4 & 6 studs by lmcreation56 MakerWorld: Download Free 3D Models

🛠️ Tips for perfect adhesion in 3D Printed:

Clean your print bed thoroughly before each print. Grease residues, dust, or fingerprints can impair adhesion and cause warping.

Check print bed calibration: a well-leveled bed ensures a uniform and well-adhered first layer.

Use an appropriate adhesion surface: depending on your material, apply a thin layer of glue stick, an adhesive spray, or a specific tape (e.g., Kapton, BuildTak).

Adjust the bed temperature correctly to promote adhesion according to the material used (PLA, ABS, PETG, etc.).

Reduce the first layer print speed: a slower speed allows for better filament adhesion to the bed.

Plan for a skirt or a brim in your slicer to stabilize the first layer and limit warping.