Search models, users, collections, and posts
8"x8" Pin Art Fidget Toy
IP Report
Print Profile(2)
8x8 base - for testing
Designer
13.3 h
1 plate
Pins - *Print 2nd- Install the base at pause
Designer
14 h
1 plate
Open in Bambu Studio
Boost
43
70
13
1
96
20
Released
Description
8"x8" Testing in progress. Only print this if you want to help with the testing and are willing to provide feedback and photos. *Cannot validate that the print will work for every situation at this time.
Procedure:
- Print the base on plate #1
- Print the pins on plate #2 - ****The print will pause at layer 53. When this happens the base should be dropped over the top of the pins and pushed down until the tops of the pins are above the level of the base***
- Press print to resume the print and seal up the pins to capture the base
- ***Allow plate to cool first*** and carefully remove from the plate and remove the brims from the pins.
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (13)