Search models, users, collections, and posts

Modular LED strips designed for WLED (as nanoleaf)

GIF
GIF

Print Profile(1)

All
P1S
P1P
X1
X1 Carbon
X1E
A1
H2D
H2D Pro
H2S
P2S
H2C
X2D
A2L

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
2.3 h
2 plates
5.0(1)

Open in Bambu Studio
Boost
65
174
2
5
119
24
Released 

Bill of Materials

List other parts
  • Terminal Block Set x 1: https://www.amazon.com/GUBCUB-Terminal-Position-Electrical-Connector/dp/B08VND5XDN/ref=sr_1_2?sr=8-2
  • WS2812B 5m 60 led/m x 1: https://www.amazon.se/dp/B0BHPP3887/ref=sspa_dk_detail_1?psc=1&s=home&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWw
  • ESP32 WLED Controller x 1: https://www.amazon.com/GLEDOPTO-Controller-Microphone-Dynamic-Addressable/dp/B0D9QJ54L7/ref=sr_1_2_sspa?sr=8-2-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1

Description

My original design inspired by nanoleaf LED-strips.

 

The design is modular and there are two LED-channel sizes included in the file, one that's about 200mm and can house 10 LEDs (when 60 LEDs/m) and the other that consits of three printed parts and snaps together to form a channel for 20 LEDs. I used WS2812b strips for this build. You can use these or similar. You'll also need a controller, this one or similar 

 

The channels grip the LED-strip and hold it in place tight, there are two channels on the side of the LED-strip so you can route the DATA-cable to another strip if needed, this keeps things nice and tidy.

 

The housing is made of 3 parts, the bottom part has a screw hole for wall fastening, it's threaded so the cable connector/wall distancer/angle adjuster joint screws in place and is lastly covered by a threaded top to hide the cable connectors and lock in the desired angle of the LED-strip. The wide joint can easily hold three luster terminals for PWR, GND and DATA

 

I made two of these sets, work great, look great. Hope you'll like them

 

Boost Me (for free)

Please consider leaving a boost if you enjoyed this print

Comment & Rating (2)

(0/1000)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.