50mm Ducted Fan - Free 3D Print Model

Search models, users, collections, and posts

Senior bomber

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(4)

All

A1 mini

X1E

P1P

H2D Pro

H2S

P1S

H2D

X1 Carbon

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

1.7 h

3 plates

5.0(4)

This print profile improves the print precision of the ducted fan casing and blades and is recommended for printing

Designer

1.8 h

3 plates

5.0(3)

0.2mm layer, 3 walls, 40% infill

Designer

1.7 h

3 plates

5.0(1)

0.2mm layer, 3 walls, 40% infill

Designer

1.7 h

3 plates

Open in Bambu Studio

Boost

158

307

355

186

Released

Description

Content has been automatically translated.

Show original

This model is a 50mm ducted fan compatible with a 2212 brushless motor, with motor mounting holes at 19mmx16mm.

Its inner diameter is 54mm, and the fan blade diameter is 52mm. It is designed for use with 2200kv-4900kv motors and 3s LiPo batteries.

Attention! Attention! Attention! Using 3D printed fan blades carries a high risk of bursting under strong centrifugal force, so 3D printed fan blades are not recommended.

If you must use 3D printed fan blades, the motor's KV value should not be too high, and you must always be cautious of the fan blades bursting during use.

Attention! Attention! Attention! When installing the fan, make sure to use screws or bullet connectors for a secure installation, and always prioritize safety during use.

Boost Me (for free)

If you must use 3D printed blades, it is recommended to print them with PETG or other filaments with better strength and toughness.

Comment & Rating (10)

@Mesut_AKIN

Print Profile

0.2mm layer, 3 walls, 40% infill

thnx for this

@Maestro33

hello , can you give me information about performance ? , if i print this with CF15 strong carbon filament is it safe ?

The designer has replied

@Seniorbomber

Using enhanced consumables for printing can certainly improve safety, but I still suggest that you pay attention to safety as much as possible when using them and take proper protective measures.

@Frank_1961

Print Profile

This print profile improves the print precision of the ducted fan casing and blades and is recommended for printing

Good small EDF-50 I installed a 2212 with KV3500 and 30A Good thrust and almost no vibration after balancing I printed PETG with 0.08mm and a 0.4mm nozzle Test run on the test bench is still pending

Show original

@user_1677048004

Print Profile

This print profile improves the print precision of the ducted fan casing and blades and is recommended for printing

works very well. but I recommend modifying the settings to be stronger just to be safe

@mcc1113

Print Profile

0.2mm layer, 2 walls, 15% infill

@Varth42

Print Profile

This print profile improves the print precision of the ducted fan casing and blades and is recommended for printing

@user_2843120644

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_4139270178

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_3875498674

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.