Finger Flipper Spinner 5-way

Finger Flipper Spinner

                     Thanks for checking out my take on a finger flipper spinner. This thing is fun, addictive, and lightweight. I found finger flipping fidgets intimidating at first, but they are not that bad to learn and with little practice it becomes easier. I found that it was easier for me to learn without looking at it. I don't know if that will help you but give it a try :) I added a few options to choose from in the profiles. Even a blank cap so you can add your own design or initials (name). That is why the print times look longer than they are. Depending on how you decide to print it, it takes about 8-12 grams of filament in most cases and 20-35mins. If anyone wants me to add different scaled profiles just let me know, because I do have large hands and don't know how it will feel size wise to everyone. There is minimal assembly, just put the spinner on one cap, put the pin in the cap, lastly push the second cap down to snap it all together. 

Print recommendations:

If you are going to use a textured plate(pei) I highly recommend using glue, glue stick, or hairspray for better adhesion. I can see some people having an issue printing the small pin if not. I use the smooth and super tack plates and have had zero issues.