Decorative Frame Scandi Look Houses Frame
Print Profile(2)
Description
Hello my dears,
my wife had the idea to design a decorative frame with houses.
We designed the frame for assembly. The assembly is self-explanatory, it's really easy.
We used a little superglue towards the middle (not necessarily required).
You can attach the frame with nails or use a nylon rope or similar
to hang it. It also fits wonderfully on the window for decoration.
As seen in a picture, we used an LED light chain with a small flat battery compartment
and hid it behind a house
I scaled the houses to 9.95 in Z in Bambu Studio, they fit well into the frame.
If they are too tight for you, you can scale them to 9.85 only in Z
The frame has supports, these were easy to remove
Printed on Bambu P1S
Material Bambu PLA Matte Milk Coffee Brown and Coal Black
Size:
The frame has a total length of approx. 60 cm and a height of approx. 24.5 cm and 3 cm thick
The houses vary in size but are designed to fit into the frame
If you like our design, please leave a like
If you like our work, please support us with a Boost
Many thanks for your support
Boost Me (for free)
If you like my work, please support me with a Boost. Many thanks to all of you
Please don't forget to rate the print profiles. Thank you very much
Here is my Instagram Account
https://www.instagram.com/kann_nix_printdesign?igsh=djdrN2p3NXUxbW9t&utm_source=qr
Check back regularly, I will regularly post previews of new prints there
Thank you very much for your support
and have fun printing
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)