Under-Sink Cabinet Hanging Tray (fits LILLÅNGEN)

📌Description:
This practical storage tray has a universal design and fits the IKEA LILLÅNGEN sink cabinet perfectly.
It easily hooks onto the vertical back panel inside the cabinet, creating extra storage space that would otherwise remain unused – perfect for storing toilet paper rolls or other small items in an organized and accessible way.

✨Benefits:

• Maximizes the depth of the cabinet without blocking the bottom area
• Compartments keep items neatly separated and prevent them from rolling or slipping
• Easy to install – simply hang it, no screws or tools required
• Sturdy enough to hold multiple toilet paper rolls or other household essentials

This model is ideal for improving organization in small bathrooms and making better use of limited cabinet space.

📐 Size note:

Two trays fit side by side in the cabinet. If your printer has a smaller or bigger build plate, you can scale the model length and width in the slicer to make it fit. Adjust the length, width and slot dimensions as needed (easy to do using the Measure [U] tool in the slicer.

• Slot width: 17.5 mm
• Slot depth: 40 mm
• Slot length: 250 mm
• Surface: 125 x 250 mm

🛠️ Tested materials and fit:
I printed the tray with PLA+ (Anycubic). It hangs securely with a little play, which helps prevent scratches on the cabinet material. No warping occurred during my print, but if needed, adding a brim or brim ears can improve adhesion.

🖨️ Printing tips:
The model is quite wide. For best results, make sure the print bed is clean and properly leveled before starting the print. A bed calibration is highly recommended to ensure good adhesion across the full width.