P1s/X1c BambuSauna Front Plate for ARCTICS4028-15K

Brief Description

Precision-fit, individual front panel for the Bambu Sauna, exclusively the front panel for installing an ARCTIC S4028-15K 40×40×28 mm fan; not the complete sauna

Origin and Remix Reference

• Remix of: BambuSauna X1C P1 Chamber Heater Remixed 24VDC
• Link to original file: https://makerworld.com/en/models/1053312-bambusauna-x1c-p1-chamber-heater-remixed-24vdc#profileId-1040461

Fan Data and Link

• Product: ARCTIC S4028-15K 40 × 40 × 28 mm
• Specifications: double ball bearings; PWM 4-pin; up to 15,000 RPM; static pressure 26.5 mmH₂O; airflow 32.67 m³/h; 12 V DC
• Amazon Link: https://www.amazon.de/dp/B09RK64BQH?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Product Details

• Scope: Only the front panel for housing the 40 mm fan; the fan and other housing parts are not included
• Function: Mounting plate and air duct; cutout for standard 40 mm screw grid; cable channel for 4-pin connector; guide lips and pre-modeled mounting holes
• Compatibility: Designed for the front area of the Bambu Sauna; size comparison with the enclosure is recommended before final installation

Material Specification and Print Recommendation

• Required Material: Only high-temperature resistant filaments such as ASA or ABS
• Reason: Long-term temperature and humidity resistance; prevention of warping and deformation in a sauna environment

• Print Settings: Layer height 0.16–0.24 mm; infill 20–30 %; 2–3 perimeters; heated print bed and enclosed print chamber recommended; observe suitable adhesion promoters and ventilation

   

Assembly Instructions and Safety

• Assembly: Place the fan into the cutout, insert screws through the panel into existing threads or nuts, route the cable through the channel, and connect the 4-pin plug
• Adjustment: Use the guide lips, first hand-tighten the screws, then finally secure them to prevent warping

• Safety: Assemble only when the device is switched off and cooled down; do not alter electrical components