IKEA Lampshades — HEMMA STRALA SUNNEBY HAVSDJUP

✦ Welcome to Ikigaiform — where Japanese minimalism meets parametric design. Every model is crafted to bring calm, organic beauty to your space. ✦

IKEA Lampshades for HEMMA / SUNNEBY / HAVSDJUP / SKAFTET / JÄLLBY (Ø45 mm) — STRÅLA variant Ø30 compatible

Important note (applies to all models)

• Default hole Ø 45 mm (fits IKEA HEMMA, SUNNEBY, HAVSDJUP, SKAFTET, JÄLLBY).
• For IKEA STRÅLA you must change the hole to Ø 30 mm:
  Uncheck “Uniform scale” → set X = 30 mm, Y = 30 mm, Z = 1.20 mm.
  For models 2–5, change the hole on both the lampshade and the upper body.
• Do not move parts, do not auto-arrange/auto-position after scaling.

All models are printed as solid shells: set Top layers = 0 and Infill = 0%.

1) Strata

Description: Horizontal, even ridges for a warm, wood-like texture in PLA Wood. Minimal, single-piece body.

Files:

 

Dimensions: Height 250 mm
Pieces: 1 (single solid body)

Print settings (Bambu PLA Wood):

• Walls: outer 0.50 mm, inner 0.50 mm
• Seam: Back
• Top layers: 0
• Bottom layers: 7
• Infill: 0%
• Speed: outer 60 mm/s, inner 80 mm/s (reduced for quality)
• Fuzzy skin: Contour only, thickness 0.15 mm (enhances wood look)

Socket hole: Ø 45 mm (see Important note for STRÅLA Ø30 mm).

2) Eclipse

Description: Smooth, calm profile with a defined neck—clean contrast between shade and upper body.

Files:

 

Dimensions: Total 300 mm (Shade 220 mm + Upper 80 mm)
Pieces: 2 (lampshade + upper body)

Print settings (Bambu PLA Wood):

• Walls: outer 0.50 mm, inner 0.50 mm
• Seam: Back
• Top layers: 0
• Bottom layers: 6
• Infill: 0%
• Speed: outer 50 mm/s, inner 80 mm/s
• Fuzzy skin: Contour only, 0.15 mm

Socket holes: Ø 45 mm on both parts (see Important note for STRÅLA Ø30 mm).

3) Aura

Description: Balanced, soft curvature that gives a gentle, even glow.

Files:

 

Dimensions: Total 300 mm (Shade 220 mm + Upper 80 mm)
Pieces: 2

Print settings (Bambu PLA Wood): same as Eclipse (bottom 6, speeds 50/80, fuzzy contour 0.15).
Socket holes: Ø 45 mm on both parts (see Important note).

4) Wave

Description: Subtle ripples around the mid-section for a dynamic, modern look.

Files:

 

Dimensions: Total 300 mm (Shade 220 mm + Upper 80 mm)
Pieces: 2

Print settings (Bambu PLA Wood): same as Eclipse/Aura.
Socket holes: Ø 45 mm on both parts (see Important note).

5) Crest

Description: Tallest of the set with a confident, wider base—great as a statement piece.

Files:

 

Dimensions: Total 350 mm (Shade 242 mm + Upper 108 mm)
Pieces: 2

Print settings (Bambu PLA Wood): same as Eclipse/Aura/Wave.
Socket holes: Ø 45 mm on both parts (see Important note).

Material recommendation

Designed and tuned for Bambu PLA Wood for the best texture and light diffusion.
If you prefer translucent/basic PLA, simply switch filament in Bambu Slicer and keep all other settings the same.