THE 100 V1.1 - Chamber + extra mods

This pack includes all the parts from the original chamber mod but in .stl format. I also put in some mods that I found useful and use it on my The 100.

Besides I also created some customizations::

• BMG Clone extruder mount
• BentoBox Mini mount with switchbox (you can find the switchbox mod at my models as well)
• LED mount fo chamber light
• Modded door hinges and handles secured with screws (the original mod uses double sided glue tape)

I printed the entire frame out of PETG. This works well even with 50C chamber temp but I don't recommend going over this value. If you want to go higher temp use ABS or ASA!

The bottom panel have a mount for Raspberry Pi 3B+ but I think there are mods for this that works with the RPi Zero.

For LEDs I used 24V strips and WAGO for powering them (see at the pictures)

For chamber temperature I used a DS18B20 sensor. It is connected to the RPi and you need to enable the pin pullup to use it. You also need to install the RPi as an MCU. Here is an awesome step by step guide: https://forum.vorondesign.com/threads/adding-a-temperature-sensor-when-youre-out-of-thermistor-ports.186/

IMPORTANT! There are models I have not tried yet, these files have WIP postfix in their name.

If you have any question, feel free to ask and I try to update the description! :)