Knight Templar Dagger
Print Profile(4)
Description
This is a dagger model inspired by those used by the Knights Templar. Perfect for cosplay.
Print in place. All parts have been setup for best results.
Full size once assembled is 36 cm from the tip of the blade to the pommel.
For assembly, it's pretty straight forward:
- Use the lining pins to assemble the two sides of the blade and press together (and glue if prefered but not needed). Same for the pommel.
- Insert the pommel at the bottom of the handle
- Insert the guard at the top of the handle
- then insert the blade at the top locking everything together
I've optimized the print for faster print time but you can achieve greater details by switching print profiles to a lower layer height (like 0.08mm).
I’m also adding a wall hanger in the print profile
Boost Me (for free)
Thank you very much if you are considering boosting this model :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)