Mini Santa – No AMS and AMS

Bring holiday cheer to your prints with this festive Mini Santa! Perfect for desktops, decorations, or stocking stuffers, this model is designed with every maker in mind; whether you’re running a single-color printer or making use of AMS for full multi-color detail.

The model is optimized for PLA and comes with multiple profiles:

• One Color 🎅 Classic single filament print, clean and simple.
• Two Color 🎅 Add an extra layer of detail. Good for printing in batches.
• Four Color 🎅 Full festive flair, with Santa’s suit, boots, and belt brought to life.
• One Color +10% Larger 🎅 A slightly scaled-up version.

Supports and a brim are included for best results. The supports are minimal and easily removed—no tools required.

Printing Notes:

• Material: PLA
• Supports: Easy no tool removal
• The brim is absolutely necessary for adhesion during the print. Santa stands on his own, but if you print without a brim he may fall off the tray as you go. The brim is large enough on this one that if your print fails due to adhesion its 100% a dirty bed problem!

Whether you print him in a single marble-white filament for a frosted look, or go all out with four colors using AMS, this Mini Santa is a quick and fun holiday print to add to your collection!

I HIGHLY recommend printing multiples if you do the AMS versions of this design. Any AMS print will have waste. Printing multiples does not change the amount of waste printed per plate, so you fill the bed with them as you print!