Pumpkin Caterpillar

Caterpillar-like pumpkin flexi model

Main model is 180mm long with 19 segments - ARC version (curved pose) will fit even on 105x105mm bed plates
Short and Keyring models are 81 and 83mm long with 8 segments

MINI-4 are with 4 segments, ~47mm long

You can easly reisize models up

There are also files for a multicolor print and for printing in parts on single-color printers

---

If you want to sell prints of this models you can buy a commercial licensed version
https://cults3d.com/en/3d-model/game/caterpumpkillar-commercial-license

Check my Flexi collection:
https://makerworld.com/en/collections/3293549-flexi

---

UPDATE 17 X 2025
Added models printed in parts in 2 colors for single-color printers
Added MINI-4 version with only 4 segments

---

Printed with:

2 walls (3 or more may feel too heavy)
no infill
no supports
0.12 (single color) and 0.16mm (multicolor) layer height

To make a multicolor version just select a Caterpumpkillar and two multicolor files and drop all three to your slicer
Choose 'yes' when asked if merge the models to one then select colors for each part - you can then duplicate the model

Printing in PARTS

You can print it in two colors on single-color printer

Using a brim around green parts is recommended

I also recommend to use pliers when assembling - push it in till you hear a click sound (if the it was printed right

For safety reasons you glue the parts together

If you want to resize the models you may also need to set XY compensation for parts to fit (for example XYcomp set to +0.1 when resized to 200%)

---