20mm outer diameter 16mm inner diameter PVC pipe connector, six-way, five-way, four-way, three-way, two-way. PVC pipe connector
Print Profile(1)
Description
Printing layer height 0.2mm, models with inner posts require support and are not easy to remove. It is recommended to print the other models without inner diameter for support-free printing
The provided tolerance is 2mm, so it can be fixed with glue. If you don't want to use glue, you can adjust for 1mm inner and outer compensation
Printing layer height 0.2mm, models with inner columns need support, not easy to disassemble, it is recommended to print other models without diameter without support. The tolerance is given as 2mm, you can fix it with glue, if you don't want to use glue, you can change the1mm inner and outer compensation.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)