Print Profile(0)
Description
THIS MODEL IS PROVIDED "AS IS"! USE IT AT YOUR OWN RISK!!! I'm not responsible if your dear camera hits the ground!
It is really awkward to handle the camera, especially rangefinder without the right handle, so i made one that slots on the right rail. Handle design is inspired by Canon EOS-1N. Also has a channel for a shutter cord, if you need it.
Use M3 hex head screw and nut to retain the handle (it goes through a hole on the camera rail).
This is intended to be a secondary grip for holding the camera with both hands. The handle is pretty sturdy and also uses a flat part on the camera body to bear the majority of the load, but i'd rather not put the full weight of a camera on it like you can do with original left grip. The right rail isn't that big. Even if the handle can take it, the rail is not designed for that — even the official R grip is intended only as a secondary grip.
Obviously, pick a good plastic and don't be shy with the perimeters. No supports needed. Also, consider printing a test cross-section to check the rail fit.
DONATE
ETH/Polygon: 0x7c888B61286Ea00E01e2b6979A2265588f7dfDaA
Trx: TFMuwm3zz5a5uDFUMei9tCUeUYCQNEuQTt
License
Comment & Rating (0)