Drowzee Pokeball

Intro

Now... This one has been on my personal to do list for ages! But I always knew that giving him the must have squiggly lines but also making the model easy to print would be super difficult and I really wanted to avoid cutting him up into too many pieces just to help print him soooo...
I just decided to model it up and send it! 🤣 and I am happy to say it actually worked out really well!

I do highly recommend using all my supplied print settings in the attached Bambu Studio 3MF file.

There is a more detailed version available on my Patreon for those who are interested you can find it and many many more exclusive and upgraded edition of previous models : ) https://www.patreon.com/c/gumnutforge/shop

HOT TIP

I warmed up the top, the middle & the bottom pieces on the faces that would all be touching with my heat gun and them push and glued them together. I found this really helps take away any slight gap you could possibly get from a poor support surface defect or slight warping. In the perfect world you won't have to do this but its a good idea to keep in your back pocket .

FILAMENTS USED.

Polymaker - Matte PLA Yellow

Polymaker - PLA Gold

Polymaker - PLA Black

Polymaker - PLA White

Makerlab - PLA Beige

Sunlu - PLA Chocolate

If you like this design feel free to hop on over and check out my Patreon page where you'll find many other designs, member exclusive designs, Patreon exclusive updates/editions to designs and the ability to request designs for no extra charge!
You can find my Patreon account with this link : https://www.patreon.com/gumnutforge/shop

Also if you have given me a boost I just want to thank you, it may seem small but they all really do add up!