Maple Leaf Shaped Tray [Set of 3]

If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier that suits you. 

Print Difficulty level: [5/10]

[ Suggested Print Setup for 15 cm figurine ]

One of the best ways to print these leaf models is at a 60-degree angle (as set up in my 3MF file). This seems to be the sweet spot between preserving the ornament’s quality and minimizing the amount of support material required. Of course, you’re welcome to experiment with other settings. Someone might come up with an even better solution.

Nozzle: 0.4mm
Layer Height: 0.15-0.2mm
Infill: 5%
Wall loops: 3-4
Supports: Tree (auto)
Threshold Angle: 40
Printed with: 
- PLA Matte Charcoal + bronze paint

These photos are real and show an actual 3D-printed figure photographed by me.
 
As always!
The key to printing my figurines is having good adhesion to the build plate. I use CryoGrip Pro Frostbite for printing, which provides excellent grip, ensuring that every figurine prints successfully every time. I mainly use filaments from Bambu and have no issues with them either. If you have a different setup, make sure to focus on build plate adhesion, use high-quality dry filament, and everything should be fine.