Gutter & Solar Mount for Ring Outdoor, Spotlight
Print Profile(1)
Description
Mount your Ring Stickup, Ring Outdoor, or Ring Outdoor plus to a gutter along with its solar panel. Compatible with two styles of the Ring mounting plates (2 screws, or 4 screws, please select build plate accordingly). You need to supply 2X or 4X (depending on your base style) #6 x 3/8" countersunk wood screws.
Directions:
- Remove base from solar panel mount and retain screw
- Install shaft of solar panel base onto the 3D printed part using the screw you just removed
- Fasten Ring mounting plate to 3D printed part using #6 x 3/8" screws
- Secure to gutter using 3D printed screws. Use 7/8" socket if running torque is too high
Note: You can re-slice to 0.08mm if the running torque is too high.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (17)