Tears Movie Poster

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.26x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mm

Filaments Used:
    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #c6ad74 PLA PolyLite Beige  Transmission Distance: 1.5
    #e2dedb PLA PolyLite White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #12 (1.04mm) swap to Red
    At layer #16 (1.36mm) swap to Beige
    At layer #20 (1.68mm) swap to White for the rest.