Johnny

cover

plate_1.png

signal-2023-12-05-17-27-56-491_f76bb06e-8b74-46fa-b573-fb27ad5d4cfb.webp

plate_1.webp

0.24 layer heightTree supports, flush into infill and support.

0.24mm layer, 2 walls, 15% infill

plate_2.png

Bookie

WhatsApp Image 2026-03-15 at 16.47.01 (1).jpeg

No AMS needed, I have added two pauses in the print. Note: the helmet is currently printed at 60% scale. If you change the scale, make sure to adjust the pauses as well! White spikes are also included in the design. If you rescale, make sure to scale these accordingly too.  Printed with filament: Bambu Lab PLA Matte Scarlet Red (11200) Bambu Lab PLA Matte Charcoal (11101) Bambu Lab PLA Matte Refill Filament Ivory White (11100)  0.12 mm layer height, 3 walls, 7% infill for the best quality. I have optimized the supports and they should come off without any issues.

Dragon med Helm 0.12mm layer, 3 walls, 7% infill

Rune med helm model pulled from the game Old School Runescape. I thinned it out on the inside to save material and make it wearable, but the exterior is still true to the game files.

Print Profile(2)

Description

Comment & Rating (23)

License

Remixes (1)

Related Models

Rune Medium Helmet